Electric Range / OVen

Not Heating

Click on the Steps below to jump directly to that section:

Step 1
1
Check temperature probe.
Step 2
2
Check elements.

**NOTICE**

Wiring Colors, Connectors, and Pins will vary by model/product code. Always be sure to download and use the service manual for your specific model.

For Test Mode procedures use this link and input your specific model: https://lgtestmodes.com/

Step 1

Check oven temperature probe for proper resistance

Step 2

Check elements for proper resistance. If resistance is very high the element will not have proper amperage and wattage and will not heat enough or at all.

If the Elements have the proper resistance, and 240Vac but the unit is still not heating and giving the Error Codes, put an Amp Clamp on the Element leads and confirm if the Element is pulling an Amp draw. If its not the Element may be opening under a load, replace Element.